3310F Series DC Electronic Load

Standard

Features:

● 5 digital V / A / W Meter.
● High-speed measurement and communication transmission.
● V.A.W. values can be displayed simultaneously.
● Large LCD Display、setting values can be adjusted by rotary knob or push button.
● OCP、OPP test function.
● Can be configured in 3302F (single channel mainframe) 3305F (two channels mainframe) or 3300F (four channels mainframe) and the mainframe with 150 sets Store Recall memory.
● Supply MPPT CC, CR, CV test function for solar panel.
● Function test for BMS protection board is provided (option).
● Power ON status value can be set.
● Flexible CC. CR, CV, CP, Dynamic and Short operation
modes.
● SHORT time setting and SHORT_VH, SHORT_VL setting
function.
● Protections against V, I, W, and °C.
● Voltage meter display the polarity positive（” ＋ ”）or
negative（” － ”）is selectable.
● SYNC. Load ON function.
● Optional Interface : GPIB、RS232、USB、LAN.  

More>>

3350F Series High Power DC Electronic Load

High power 

Features:

● 5 digital V / A / W Meter.
● High-speed measurement and communication transmission.
● V.A.W. values can be displayed simultaneously.
● Large LCD Display、setting values can be adjusted by rotary knob or push button.
● OCP、OPP test function.
● Can be configured in 3302F［single channel mainframe 3305F［two channels mainframe］or 3300F［four channels mainframe］and the mainframe with 150 sets Store / Recall memory.
● Supply MPPT CC, CR, CV test function for solar panel.
● Function test for BMS protection board is provided (option).
● Power ON status value can be set.
● Flexible CC. CR, CV, CP, Dynamic and Short operation modes.
● SHORT time setting and SHORT_VH, SHORT_VL setting function.
● Protections against V, I, W, and °C.
● Voltage meter display the polarity positive（” ＋ ”）or negative（” － ”）is selectable.
● SYNC. Load ON function.
● Optional Interface : GPIB、RS232、USB、LAN.

More>>

Applications:

● Voltage / Current source
● SMPS transient response
● Current limit testing and battery emulation
● Battery charger
● Battery discharge
● R&D, Quality Control
● ATE system
● Production testing

3310G Series DC Electronic Load

Features:

● Flexible CC, CR, CV, CP, CC + CV, CP + CV, Dynamic and short circuit operation modes
● Built-in test modes include Battery Discharge, BMS, Fuse/Breaker Trip/Non-Trip, Short circuit, OCP, OPP test modes
● Turbo mode can withstand up to 4 times the current and power electronic load within 1 sec. period，most fit Fuse/Breaker and BMS、Short circuit、OCP、OPP test。
● Provide battery BMS protection test function 
● Can set the power-on status value。
● Voltage meter display can be configured as polarity positive ”+”）or negative （”－”）。
● Optional 9923 load current waveform generator to provide the battery actual discharge current waveform simulation

 More>>

Applications:

● SMPS transient response
● Voltage / Current source
● Voltage Source Current limit testing and battery emulation for Charger testing
● Battery discharge capacity
● Lithium battery BMS charge and discharge protection
● Fuse , Breaker , PTC specification test
● MPPT test function for solar panels
● R&D, Quality Control
● ATE system

3340G Series LED DC Electronic Load Simulator

Features:

● LED mode load for LED Power Driver test.
● CC, CR, CV, CP, LED and Dynamic mode.
● Simulate LED Forward Bias Voltage (Vd) and Resistance (Rd).
● Fast Response for PWM dimming test.
● Built-in dimming control signal for PWM dimming test.
● Short circuit test by external relay (built-in short relay driver circuit).
● 5 digital V / A / W Meter.
● Protections against V, I, W, and ℃.
● Can be configured in 3302F［single channel mainframe］3305F［two channels mainframe］or 3300F［four channels mainframe］and the mainframe with 150 sets Store / Recall memory.
● Voltage can be increased to 600V（option）
● Optional Interface：GPIB、RS232、USB、LAN.

 More>>

Applications:

● LED Driver
● Voltage / Current source
● SMPS transient response
● Current limit testing and
battery emulation
● Battery charger
● Battery discharge
● R&D / Quality Control
● ATE system
● Production testing